SIGMA Capture Pro

SIGMA Capture Pro allows photographers to tether the SIGMA sd Quattro series、SIGMA SD1、SIGMA SD1 Merrill cameras to their computer and take control over camera settings and capture images remotely.

It is possible to download the installer program of SIGMA Capture Pro 1.3.0 for Windows and SIGMA Capture Pro 1.3.2 for Macintosh. Please ensure that you read the system requirements for this software before downloading them.

Download Targets

Customers who use SIGMA sd Quattro series and SIGMA SD1 and SIGMA SD1 Merrill cameras.

Download

SIGMA Capture Pro for Windows (52.91MB)
SCP_1.3.0_setup.exe

Your device does not support this download service.

Update History

  • Ver.1.3.0

    • It is compatible with the sd Quattro H.
    • It is possible to use the Live View Display Mode of the sd Quattro H, and Grid Line Display, LV Enlarged Display, Focus Peaking Display are also compatible.*
    • It is compatible with the SFD Mode of the sd Quattro H.
    • It is compatible with the DC Crop Mode of the sd Quattro H.

    * A future firmware update will make the sd Quattro compatible with the function.

Warnings

  • Before you start the download of the installer program, make sure all applications in your computer are finished.
  • Click the download button, or push the right button of your mouse (“right click”) and start download.
  • Make sure SCP_1.3.0_setup.exe is saved in the destination you specified.
  • It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

Installation

  • If you have “SIGMA Capture Pro” installed on your computer, uninstall it by using “Add or Remove Programs” on a computer. It is not possible to install “SIGMA Capture Pro” properly if “SIGMA Capture Pro” is already installed.
  • First, you have to choose the language of the program you install. Select the language and push the OK button. Then, carry out the install according to the procedures displayed in the screen.
  • You need to restart the computer soon after this software is installed.

Operating Conditions

  • Pentium 4 or faster processor (Core2Duo or higher recommended)
  • Windows 8.1 or Windows 10
  • 2GB of RAM (3GB of more recommended)
  • 1GB of available hard disk space
  • 24bit or more graphic card
  • 1024 x 768 screen resolution
  • PC with USB2.0 port (USB1.1 or lower is not recommended)
SIGMA Capture Pro for Mac (23.58MB)
SIGMA_Capture_Pro132.dmg

Your device does not support this download service.

Update History

  • Ver.1.3.2

    • macOS 10.15 Catalina support
    • Apple’s Notarization Service support*
    • Corrected the phenomenon that X3I file cannot be saved properly when saving the image onto the hard disk in Mac and tethered shooting is repeated in SFD mode.
    • Corrected the phenomenon that SIGMA Photo Pro does not start after image save and transfer even if “Start SIGMA Photo Pro” in “Display after image transfer” in “Preferences” is selected.

    * For customers using macOS 10.15 Catalina, please update to this version.

  • Ver.1.3.1

    • It is compatible with the sd Quattro with firmware ver. 1.04.

  • Ver.1.3.0

    • It is compatible with the sd Quattro H.
    • It is possible to use the Live View Display Mode of the sd Quattro H, and Grid Line Display, LV Enlarged Display, Focus Peaking Display are also compatible.*
    • It is compatible with the SFD Mode of the sd Quattro H.
    • It is compatible with the DC Crop Mode of the sd Quattro H.

    * A future firmware update will make the sd Quattro compatible with the function.

Warnings

  • Before starting the download of the installer program, make sure all applications in your computer are closed.
  • Click the download button, or push the mouse button whilst holding down the Control key on your keyboard (Control+ Click).
  • Select “download linked file” from the displayed menu. Start the download of the file.
  • After completing the download of “SIGMA_Capture_Pro132.dmg” file, it will be mounted automatically and “SIGMA Capture Pro” disk image will be displayed. If the file is not mounted automatically, please double click the “SIGMA_Capture_Pro132.dmg” file. “SIGMA Capture Pro” disk image will then be displayed.
  • It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

Installation

  • To start the instalation drag and copy SIGMA Capture Pro folder from “SIGMA Capture Pro” Disk Image to applications folder. Installation will be complete after being copied to this folder.
  • Select and open the Applications folder from “Go” in the Finder menu.
  • If SIGMA Capture Pro 1.2.0 already has been installed on your computer, please delete the “SIGMA Capture Pro” folder in the “Application” folder before installing.

Operating Conditions

  • macOS 10.13, 10.14, 10.15 and Intel Core Processor
  • 2GB of RAM (3GB of more recommended)
  • 1GB of available hard disk space
  • 24bit or more graphic card
  • 1024 x 768 screen resolution
  • PC with USB2.0 port (USB1.1 or lower is not recommended)
×